1) Changes and Special Additional Terms and Conditions
Eurotek Industries may revise the General Terms at any time without notice. You should revisit this Site periodically to make sure you are aware of the most recent General Terms because they will be binding on you. Your use of the Site or Services after such changes constitutes your agreement to such changes.
You are advised to check each page you visit on the Site. Some locations may have special additional terms and conditions that apply to use of or interaction with that location. These terms and conditions may also be changed at any time without notice. Your use of that location constitutes your acceptance of those special additional terms and conditions.
2) Use of the Site
A. Site Security. You are prohibited from violating or attempting to violate, the security of the Site or Services. Any such violations may result in criminal and civil liabilities to you. We will investigate any alleged violations, and, if a criminal violation is suspected, we will cooperate with law enforcement agencies in their investigations. Violations of the security of the Site and Services include, without limitation, the following:
Logging into or attempting to log into a server or account that you are not authorized to access;
Accessing data or taking any action to obtain services not intended for you or your use;
Attempting to probe, scan, or test the vulnerability of any system, subsystem or network;
Tampering, hacking, modifying or otherwise corrupting or breaching security or authentication measures without proper authorization;
Transmitting material that contains viruses, Trojan horses, worms, time bombs, cancelbots or other computer programming routines or engines with the intent or effect of damaging, destroying, disrupting or otherwise impairing a computer’s functionality or the operation of the Site or Services;
Interfering with, intercepting or expropriating any system, data or information; or
Interfering with service to any user, host, or network including, without limitation, by means of overloading, “flooding,” “mailbombing,” or “crashing” any computer system.
B. Infringement. You are prohibited from using the Site or Services to infringe on Eurotek Industries ’s or any person’s or other entity’s copyright, trademark, patent or other intellectual property rights. We may terminate your right to access the Site and Services if we believe you are using the Site and Services in a manner that infringes the copyright, trademark, patent or other intellectual property rights of Eurotek Industries or another. You may be ordered by a court to pay money damages to us and to the rightful owner of any intellectual property rights you violate.
C. Other Prohibited Actions. In using the Site or Services, you must not:
Post, email, link, or otherwise transmit or use the Site or Services in furtherance of any unlawful, harmful, harassing, defamatory, threatening, vulgar, indecent, sexually explicit, hateful or otherwise objectionable material of any kind, any material that exploits children or is invasive of another person’s privacy or other rights, or any material that Eurotek Industries In its sole discretion does not wish posted or transmitted on the Site and Services;
Post, email, or otherwise transmit images, software, text, or other material protected by intellectual property laws, including without limitation copyright or trademark laws and rights of publicity and privacy unless you own or control the rights thereto or have received all necessary authorizations to do the same;
Engage in and/or encourage conduct that would: 1) violate any applicable law or regulation or 2) give rise to civil liability;
Engage in conduct, which could damage or impair the intended operability of the Site or the Services;
Impersonate any individual or entity, falsely state or otherwise misrepresent your identity or affiliation in any way;
Engage in marketing or promotion of goods or services; or
Assist or permit any persons in engaging in any of the activities described above.
D. Your Content. You must exercise caution, good sense and proper judgment in using the Site and Services. You are responsible for any material you place on or transmit to or through the Site or Services. You agree, represent and warrant that any information you post to or transmit through the Site or Services is truthful, accurate, not misleading and offered in good faith and that you have the right to post or transmit such information. Such information (including without limitation, data, text, software, music, sound, photographs, graphics, video, messages or any other materials whatsoever), whether publicly posted or privately transmitted, is your sole responsibility.
E. You agree that use of any information obtained via the Site or Services is at your own risk.
F. Consequences of Unacceptable Use. We reserve the right (but not the obligation) in our sole discretion to refuse or delete any of your content as well as suspend or terminate without notice your access to the Site and Services upon a violation or attempted violation of this Agreement. Indirect or attempted violations of this Agreement, and actual or attempted violations by a third party acting on your behalf, shall be deemed violations by you of this Agreement. Furthermore, it is a violation of this Agreement to use the services of another company for the purpose of facilitating any of the activities, which violate this Agreement if such use of another company’s service could reasonably be expected to adversely affect the Site and Services in any manner.
G. No Licensing. By your use of the Site or the Services, you receive no license, express or implied, under any copyright, trademark, patent rights or trade secret rights now or hereafter, owned, controlled or possessed by Eurotek Industries.
3) Trademark and Copyright
The material contained in this Site is protected by copyright. No material from this Site may be copied, reproduced, republished, uploaded, broadcast, posted, transmitted or distributed except as expressly permitted by these General Terms. Use of the materials in any other way or for any purpose other than for personal, non-commercial use is a violation of Eurotek Industries ’s copyright and other proprietary rights. Permission for all other uses of materials must be obtained from Eurotek Industries in advance in writing. All content, interfaces, graphics, code, design rights, and other intellectual property rights, in each case, whether registered or unregistered, other than the marks of third parties, and related goodwill are the property of Eurotek Industries.
4) Copyright Infringement Complaints
Eurotek Industries respects the intellectual property rights of others. If you believe that your work has been copied or otherwise infringed, you may submit a notice of it to Eurotek Industries. Please send your copyright infringement notification to firstname.lastname@example.org.
To be effective, your notice must be in writing and include the following:
A physical or electronic signature of a person authorized to act on behalf of the owner of an exclusive right that is allegedly infringed.
Identification of the copyrighted work claimed to have been infringed, or, if multiple copyrighted works at a single online site are covered by a single notification, a representative list of such works at that site.
Identification of the material that is claimed to be infringing or to be the subject of infringing activity and that is to be removed or access to which is to be disabled, and information reasonably sufficient to permit Eurotek Industries to locate the material.
Information reasonably sufficient to permit Eurotek Industries to contact the complaining party, such as an address, telephone number, and, if available, an electronic mail address at which the complaining party may be contacted. A statement that the complaining party has a good faith belief that use of the material in the manner complained of is not authorized by the copyright owner, its agent, or the law.
A statement that the information in the notification is accurate, and under penalty of perjury, that the complaining party is authorized to act on behalf of the owner of an exclusive right that is allegedly infringed.
Upon receipt of an effective copyright notice, Eurotek Industries will expeditiously investigate and take appropriate actions pursuant to the DMCA, which may include the removal of, or the disabling of access to, the complained-of material.
5) Privacy Statement
All personal information provided via this Site will be handled in accordance with the Site’s Privacy Statement.
6) No Warranty
This Site and Services are provided “As Is” and without warranties of any kind, whether express or implied. To the fullest extent permissible pursuant to applicable law, Eurotek Industries disclaims all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose and non-infringement. Eurotek Industries does not represent or warrant that the functions or Services contained in the Site will be uninterrupted or error-free, that defects will be corrected, or that this Site or the services are free of viruses or other malware or harmful components. Eurotek Industries does not make any warranties or representations regarding the use of contents of this Site or Services in terms of their correctness, accuracy, adequacy, usefulness, timeliness, reliability or otherwise. Some jurisdictions do not allow exclusion of implied warranties, so the above limitations and exclusions may not apply to you.
7) Limitation of Liability
You assume full responsibility for your use of the Site. Any information you send or receive during your use of the Site may not be secure and may be intercepted by unauthorized parties. Your use of the Site is at your own risk and is made available to you at no charge; accordingly, to the fullest extent permitted by applicable law, Eurotek Industries and its affiliates shall not be liable to you or any other party for any direct, indirect, compensatory, punitive, special or consequential damages that result from the use of, or the inability to use, the Site, the Services or the contents on this Site or the performance of the Site, Services or products described on this Site, or from any actions we take or fail to take as a result of communications you send us or material you post, or the delay or inability to use the Site, or for any information, products, or Services advertised in or obtained through the Site, whether based on contract, tort, strict liability or otherwise, even if Eurotek Industries or its affiliates have been advised of the possibility of such damages. You specifically acknowledge and agree that Eurotek Industries and its affiliates are not liable for any defamatory, offensive, or illegal conduct of any user of the Site. Applicable law may not allow the limitation or exclusion of liability or incidental or consequential damages, so the above limitation or exclusion may not apply to you.
If you are dissatisfied with any portion of the Site or the Services or with any of these terms, your sole and exclusive remedy is to discontinue using the Site and the Services.
8) Non-Confidentiality of User Materials
Eurotek Industries does not accept or consider any unsolicited ideas, including ideas for new products, promotions, or technologies. You should not transmit any material to or through this Site that you consider to be confidential or proprietary. Any material, which you transmit to or through this Site, will be considered non-confidential and non-proprietary. Except as expressly provided in Eurotek Industries’ Privacy Statement or separate written agreement between you and Eurotek Industries, you give Eurotek Industries an unrestricted, irrevocable, worldwide, royalty-free license to use, reproduce, display, publicly perform, transmit and distribute such information in any media. You further agree that Eurotek Industries has the right to use, without any payment or accounting to you or others, any concepts, know-how or ideas, which you (and those who act on your behalf) transmit to or through the Site.
9) Links to Third Party Websites and Use of Sharing Tools
As a convenience, Eurotek Industries may provide links to websites operated by third parties. Eurotek Industries may also provide sharing tools that allow social web linking, bookmarking, rating, recommending, emailing, instant messaging, and posting to blogs. Following the links or using the sharing tools will take you to third party websites, which Eurotek Industries does not own, control, or maintain. If you decide to access a third party’s website through a link or a sharing tool provided by this Site, you do this at your sole risk. Eurotek Industries is not responsible for any viruses or other malware or damaging elements encountered in a third party website. Eurotek Industries does not control any third party websites, and makes no warranty or representation regarding, and is not responsible for, any third party websites or the content of such websites. The inclusion of links or sharing tools to third party sites is not an endorsement of the content of such sites. Different terms and conditions may apply to your use of such third party sites and the sharing tools and you are advised to review such terms and conditions prior to usage. Further, the providers of such third party sites and the sharing tools may have privacy policies and practices that are different from our Privacy Statement. You are advised to check the privacy policies and practices of such providers and contact the operator if you have any concerns or questions.
10) Indemnity of Company
You agree to indemnify, hold harmless, and defend Eurotek Industries (including subsidiaries and affiliates of Eurotek Industries, hereinafter “Eurotek Industries “) as well as Eurotek Industries officers, directors and employees, from and against any claim, demand, cause of action, debt, loss or liability, including reasonable attorneys’ fees, to the extent that such action is based upon, arises out of, or relates to your violation, or violation by any other person using your password or account of the terms and conditions of this Agreement.
11) Applicable Law and Dispute Resolution
This Agreement shall be governed by the laws of the United Kingdom.